Front terminals, Center terminals, Surround terminals – Yamaha HTR-5860 User Manual
Page 18: Surround back terminals, Presence terminals, Subwoofer pre out jack, System connector jack
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SPEAKER SETUP
■
FRONT terminals
Connect one or two speaker systems (6, 7) to these
terminals. If you use only one speaker system, connect it
to the FRONT A or B terminals.
■
CENTER terminals
Connect a center speaker (8) to these terminals.
■
SURROUND terminals
Connect surround speakers (4, 5) to these terminals.
■
SURROUND BACK terminals
Connect surround back speakers (9, 10) to these terminals.
If you only connect one surround back speaker, connect it
to the left (L) terminals.
■
PRESENCE terminals
Connect presence speakers (2, 3) to these terminals.
■
SUBWOOFER PRE OUT jack
Connect a subwoofer with built-in amplifier (1), such as
the YAMAHA Active Servo Processing Subwoofer
System, to this jack.
■
SYSTEM CONNECTOR jack
U.se this jack to control the power of your YAMAHA
subwoofer if a system connector jack is available on the
subw-'oofer.
'A
m
0
10.
Speaker layout
14