Yamaha HTR-5860 - Manual (Page 7)

GETTING STARTED
Supplied accessories
Please check that you received all of the following parts.
Remote control Batteries (4)
(AAA, R03, UM-4)
03 C3
Ò O O 3
o o o o"
o U 5 H
□ D E3
O © 0 0
_ ™
0-0 0 0­
©
gg s s s
S S G3 EO
Indoor FM antenna
AM loop antenna Optimizer microphone
installing batteries in the remote
control
1
Press the ' W part and slide the battery
compartment cover off.
2
Insert four supplied batteries (AAA, R03,
UIVI-4) according to the polarity markings
(+ / -) on the inside of the battery
compartment.
Notes on batteries
• Change all of the batteries if you notice the following
conditions; the operation range of the remote control decrciises.
the indicator docs not flash or its light becomes dim.
• Do not use old batteries together wdth new ones.
• Do not use different types of batleries (such as alkaline and
manganese batleries) together. Read the packaging carefully as
these different types of batteries may have the same shape anti
color.
• If the batteries have leaked, dispose of them immediately. Avoid
touching the leaked material or letting it come into contact with
clothing, etc. Clean the battery compartment thoroughly before
installing new batteries.
• Do not throw away batteries with general house waste; dispose
of them correctly in accordance with vonr local regulations.
If the remote control is without batteries for more than
2 minutes, or if exhausted batteries remain in the
remote control, the contents of the memory may be
cleared. When the memory is cleared, insert new-
batteries, set up the remote control code and program
any accjuired functions that may have been cleared.
3
Slide the cover back until it snaps into place.