Yamaha HTR-5860 - Manual (Page 75)

SET MENU
■ Parameter Initialization INI
Use this feature to initialize the parameters for each sound
field program within a sound field program group. When
you initialize a sound field program group, all of the
parameter values within that group revert to their initial
settings.
Press the corresponding numeric button for the sound field
program that you want to initialize.
Choices:
An asterisk (*) appears to the left of program names that
have been changed from their initial settings.
Choices: STEREO, MUSIC, ENTERTAINMENT,
MOVIE, STANDAND
Notes
• You cannot automatically revert to the previous parameter
settings once you initialize a sound field program group.
• You cannot separately initialize individual sound field
programs.
• You cannot initialize any program groups when “MEMORY
GUARD" is set to ON.
■ Zone set D)!''1i..JLTI FfCiHIE iilET
Use to specify the location of speakers connected to the
SPEAKERS B terminals.
Notes
• If you connect headphones to the PHONES jack on the unit
wdien “SP B” is set to ZONE B. the sound is output from both
headphones and SPEAKERS B.
• If a DSP program is selected wlien “SP B” is set to ZONE B,
the unit autoniatically enters the Virtual CINEMA DSP mode.
■ XM Radio setting E i i iil R h C
XM information display time xM
Use to set the time for displaying XM information in the
on-screen display. If “lOs” or ’AOs” is selected, XM
information is displayed for 10 or 30 seconds after
pressing DISPLAY.
Choices: OFF,
10s, 30s, ON
When “XM DISPLAY" in the SET MENU is set to “ON",
pressing DISPLAY show's XM information tintil you select
tuiother input source (see page 30).
XM Radio antenna fHI h HT ::
Use to check the current reception level for the XM
Connect and Play digital antenna accessory connected to
this unit. For the best reception, orient the XM Connect
and Play digital antenna accessory so that a value of XX%
or more is displayed here.
Range: NONE, 0 to 100%
Note
“NONE" is displayed if the XM Connect and Play digital antenna
ticcessory is not connected to this unit. If this happens, check the
antenna connections (sec page 44).
xi'l SHTEHl'Ifl-
[¿NfkKJiNeturn
Speaker B setting ;::;i' lEi
Use this feature to select the location of the front speakers
connected to the SPEAKERS B terminals.
Choices:
FRONT, ZONE B
• Select FRONT to turn on/off SPEAKERS A and B
when the speakers connected to the SPEAKERS B
terminals are set in the main room.
• Select ZONE B if the speakers connected to the
SPEAKERS B terminals are set in another room. If
SPEAKERS A is turned OFF and SPEAKERS B is
turned ON, all the speakers including the subwoofer in
the main room are muted and the unit outputs sound
from SPEAKERS B only.
71