Yamaha HTR-5860 - Manual (Page 64)

SET MENU
You can use the following parameters in SET MENU to adjust a variety of system settings and customize the way this
unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening
environment.
■ AUTO SETUP
Use to specify which speaker parameters auto setup will adjust, and to activate the auto setup procedure (see page 24).
■ MANUAL SETUP
Use to manually adjust speaker and system parameters.
1 SOUND MENU
Use to manually adjust any speaker setting, alter the quality and tone of the sound output by the system or compensate for
video signal processing delays when using ECD monitors or projectors.
Most of the parameters described in SOUND MENU are set automatically when you run auto setup (see page 24). You can use SOUNE)
MENU to make furlher adjustments, but
ws recommend running auto setup first.
Item Features Page
ITiiSPIEijKEF; SlE'l
Selects the size of each speaker, the speakers for low-freciiieney signal output, and the cross over
frequency.
[TuBI-dEfiKEF; LEliEl... Adjusts the out.piil level of each speaker. 65
OSP CulSTldNCE: Adjusts the delay time of each speaker. 66
Adjusts the tonal quality of the center speaker. 66
lEiiLFE: LEliEL Adjusts the output level of the LFE channel for Dolby Digital or DTS signals. 67
RijhliBIE Adjusts the dynamic range for Dolby Digital or DTS signals. 67
6)iiUi)I0 SET Customizes the muting level, audio delay and tone bypass settings. 67
2 INPUT MENU
Use to reassign digital input/outputs, select the input mode or rename your inputs.
Item Features Page
iViLNl MivEilGHnlEiT! Assigns jacks according to the component to be used. 68
EOIH|:d„JT i'lCiDsE Selects the initial input mode of the source. 69
!j:JiHid..JT FilENfirlE Changes the name of the inputs. 69
D)U0!.J..iiiE TFilfl Adjusts the output voliiine of each jack. 69
60