Warnings after auto setup – Yamaha HTR-5860 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
AUTO SETUP
Warnings after auto setup
Press
K . / y t o
display detailed information about individual warnings.
Warning message
Cause
Remedy
i.J.i: OUT OF f'diMSI:
Speaker polarity is not eorrect. This message
may appear depending on the speakers even
when the speakers are connected correctly.
• Check the speaker connections for proper polarity
(+/-).
^
!.j.SdiOUEF! 24iM
The distance between the speaker and the
listening position is 24 m (80 ft) or more.
* Move the speaker closer to the listening position.
•
Cheek the speaker connections for proper polarity
(+ / -).
i.J.EliFiOF:
The difference of volume level among speakers
is excessive. (No level correction is made.)
•
Readjust the speaker installation so that all speakers
are set in locations with similar conditions.
• Cheek the speaker connections for proper polarity
(+ /
—
)-
•
Use speakers of similar quality and efficiency.
If the ERROR or WARNING screens appears, check the cause of Ihe problem, then perform the auto setup procedure again.
If warning W- ] appears, corrections are made, but they may not be optimal
If warning W-2 or W-3 appears, no corrections are made.
If error E-10 occurs repeatedly, please contact a qualified YAMAHA service center.
29