Yamaha HTR-5860 - Manual (Page 40)

PLAYBACK
Selecting input modes
This unit comes with a variety of input jacks. Do the
following to select the type of input signals you want to
use.
1
Rotate INPUT to select the input source.
Notes
• When playing a DTS-CD/LD. he sure lo set INPUT MODE to
DTS. " "
• If the digital output data of the player has been processed in any
w'ay, you may tiot be able to perforin DTS decoding even if you
make a digital connection between this unit and the player
depending on the player.
■ Displaying information about the input
source
You can display the type, format and sampling frequency
of the current input signal.
Front panel
1
Select the input source.
2
Press INPUT MODE to select an input mode.
In most cases, use AUTO.
■!
'вЩч
INPUT MODE
Front panel
♦
WR.VeR2 VCR1 V-AUX DTM'CBl EWD MD-'CD-R TUNER CP PHONO
J ) U D ______ ,i:i.LiTCL
Input source Input mode
Automatically selects input signals in
the following order:
1) Digital signals*
2) Analog signals
Selects only digital .signals encoded in
DTS. If no DTS signals are input, no
sound is output.
Selects only analog signals. If no
analog signals are input, no sound is
output.
If this unil detects a Dolby Digital or DTS signal, the
decoder automatically sw-dtches to the approprithc
decoder.
I It',II II I ii.,:
Press AMP to select the AMP mode, then
press STRAIGHT so that “STRAIGHT”
appears in the display.
then
You can adjust the default input mode of this unit (see page 69).
36