If a warning screen appears – Yamaha HTR-5860 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/653434/31/background.png)
AUTO SETUP
If a warning screen appears
1
Press ENTER to display detailed information
about the warning.
Press <^ / 5> to switch between warning messages.
♦
W-1 warning screen
For details about each message, see page 29.
si'
* Warnings let you know about polciitial problems detected
during auto setup. Warnings wall not cancel the auto setup.
• The number of warnings is displayed to the right of
•■WARNING”.
• When Ihe warning is nol applicable lo a speaker, "—” is
displayed,
2
When you are finished, press ENTER to
return to the RESULTiEXIT screen.
Continue from step 7 on page 26.
Notes
•
If you change speakers, speaker posilions, or the layout of your
listening environment, perform auto setup again to re-calibrate
your system.
• Depending on listening environments, SWFR PHASE:REV
appears in AUTOiCHklK and SUBWOOFER PHASE
parameter in the SETMENU (see page 65) is automatically set
to REVERSE. To select the desired setting, change the
SUBWOOFER PHASE parameter in the SETMENU.
• In the DISTANCE results, the distance displayed may be longer
than the actual distance depending on the characteristics of your
subwoofer.
27