Using set menu, 1 press amp, 2 press set menu – Yamaha HTR-5860 User Manual
Page 66: 3 press y\/\y to select m an ual setu p, 4 press enter to enter manual setup, 5 press /\ / \/ to select the desired menu, 6 press enter to enter the selected menu, 7 press /\ / \/ and enter to select the, 8 to exit, press set menu when finished, Memory back-up
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SET MENU
Using SET MENU
Use the remote control to access and adjust each
parameter.
1*1
■
3-7
• You can change SET MENU parameters while tlie unit is
reproducing sound.
• If you press a sound field program butlon during SET MENU
operation, the SET MENU is canceled.
Note
You cannot change some SET MENU parameters while the unit
is in either cinema or music night listening mode.
1
Press AMP.
2
Press SET MENU.
3
Press
y \ / \ y
to
select M AN UAL SETU P.
QX
= ЙМТП SETilP
= MPNLIFIL SE:TUF
^SlGHhl INFlU
[ ENTER ]Xnt&r
4
Press ENTER to enter MANUAL SETUP.
1 SOUND MENU appear.s on the front panel display.
ENTER
'-------
■
X
A-E,'CAT.
L
a
-E;CAT.
-
r
D MEHLI
2 INPUT MENU
3 OPTION MENU
[ir-'[T'!Up--'Doir
[ENTER]:Enter
5
Press /\ / \/ to select the desired menu.
6
Press ENTER to enter the selected menu.
PRiSETyCH
A 1
XT y™X[X]|+“*^
А-Е/СДТ.
NA-EfCAT.
R
7
Press /\ / \/ and ENTER to select the
submenu, then press
/ \ / \ / t o
select the item
and < / > to change the parameter.
• Repeat this operation to select and adjust each
setting.
• To return to the previous menu level, press
RETURN.
8
To exit, press SET MENU when finished.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is in the standby mode.
However, if the power cord is disconnected from the
AC outlet, or the power supply is cut for more than one
week, the stored data will be lost. If so, adjust the
items again.
62