Resetting the factory presets – Yamaha HTR-5860 User Manual
Page 94
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/653434/94/background.png)
RESETTING THE FACTORY PRESETS
If you want to reset all of your unit’s parameters for any
reason, do the following. This procedure completely resets
ALL parameters, including the SET MENU, level, assign
and tuner presets.
Be sure this unit is in standby mode.
{U.S.A. model)
With the unit in standby mode, hold down
STRAIGHT (EFFECT) on the front panel and
press STANDBY/ON.
The ADVANCED SETUP menu appears in the front
panel display.
Press STRAIGHT (EFFECT) to select the
desired setting.
PiEiSiEl" To reset the unit to its factory presets.
CiRHijE]... To cancel without making any changes.
Press STANDBY/ON to confirm your
selection.
If you selected "RESET”, the unit is reset to its
factory presets and switches to standby mode.
If you selected "CANCEL”, the unit switches to
standby mode and nothing is reset.
While holding
down, press
To cancel the initialization procedure w'ithout making any
changes, press STANDBY/ON.
2
Rotate PROGRAM to move through the menu
and select “PRESET”.
PROGRAM
90