Yamaha HTR-5860 - Manual (Page 30)

AUTO SETUP
The results displayed in the RESULT:EXIT screen
are as follows:
The number of connected speakers
displayed in the order:
Front/Back/Subwoofer
!..i.!.
b
' The distance of the speakers from this
unit displayed in the order:
Closest speaker distance/Farthest
speaker distance
The speaker output level displayed in
the order:
Lowest output level/Flighest output
level
• If you selected AUTO in step 5, ‘"WAITING”
appears when the auto setup procedure is started,
then loud test tones are output from each speaker in
turn.
• If you selected DEFAULT, RELOAD or UNDO in
step 5, no test tones are output.
• If an ERROR screen appears, see “If an error
screen appears” on page 26.
• If a WARNING screen appears, see ‘‘If a warning
screen appears” on page 27.
24}'.
You can display the detailed resull infonnalion fiy using sa and
ENTER lo select “RESULT”. In the detailed resull information
screen, you can switch information by pressing a\ / \/ / <( / ^
7
Press < / > to select SET or CANCEL, then
press ENTER to return to the SET MENU
screen.
■ If an error screen appears
Use / < / > l o select RETRY or EXIT, then
press ENTER.
E-'
9
!LISER CfiNCEL
Dcrr’t opera
any fu net-io
>RETRV EHII
[ENTEREnter
To refry the auto setup procedure.
To exit auto setup.
bi::. I To apply the auto setup (YPAO)
settings.
CliHCliEL. To cancel the auto setup (YPAO)
without making any changes.
24'i
If you are not satisfied with the result or want to manually adjust
each setup parameter, use the manual selup parameters (see
page 59).
Notes
' If E-IO appears during lesling, restart lire procedure from step 3.
' Tr cancel lire auto selup procedure before completion, press /\.
26