Connections for other video components, Video aux jacks {on the front panel) – Yamaha HTR-5860 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECTIONS
■ Connections for other video components
Notes
• Be sure to connect your video scaircc components in the same way you connect your video monitor 1(5 this unit if VIDEO CONV. (see
page 70) is set to OFF. For example, if you connect your video rnonilor to this unit using a VIDEO connection, conned your video
scmrce ccnnponents to this unit using the VIDEO connections. (Even when V.CONV is set to OFF, S-video signals input from your
video source component are aulomatically converted to composite signals in this unit.)
• Converted video signals are only output to the MONITOR OUT Jacks. When recording you must make the same type of video
connections (i.e., S-video) belw'een each ccnnponent.
■ VIDEO AUX jacks {on the front panel)
Use these jacks to connect any video source, such as a
same console or video camera, to this unit.
18