Setting xm satellite radio preset channels, Ri>i23 – Yamaha HTR-5860 User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
XM SATELLITE RADIO TUNING
3
Press the numeric buttons to enter the
desired channei number.
For example, to enter the number 123, pres.s the
numeric buttons as shown below.
The display changes as follows.
Tiir
< H r i > — 1
♦
OTV.iCBl [)VD
♦
:;«;ri>i23
if you enter fewer than three numbers, you
may press ENT, to tune to the channei
immediateiy or wait a few seconds to confirm
the entered channei number.
Setting XM Satellite Radio preset
channels
You can use this feature to store up to 40 XM Satellite
Radio channels (eight preset numbers in five preset
groups, A1 to E8). You can then recall any preset channel
easily by selecting the preset group and number as
described in “Preset Search inode” on page 50.
Search the XWi Satellite Radio channel you
want to set as a preset channel.
To search the desired channel, carry out “All Channel
Search mode” on page 48, “Category Search mode”
on page 49, or “Direct Number Access mode” on
page 50.
C 040 3 [:>00j=- Tra
When the channel number “040” is selected
Press MEMORY on the unit (or remote
control during the TUNER mode).
The MEMORY indicator flashes for about five
seconds.
‘ If no button is pressed within a few seconds after entering one
digit or two-digit number, the unit automatically confirms the
entered channel number.
‘ Pressing a button other than numeric buttons or ENT. cancels
the direct number access procedure.
(uiEMORY
or
Front panel
♦
Remote control
HFTiriPt'
/ I \
Flashes
51