Yamaha HTR-5860 - Manual (Page 44)

FM/AM TUNING
Press and hold MEMORY (MAN’UAUTO FM)
for more than 3 seconds.
The preset number, the MEMORY and AUTO
indicators flash. After about 5 seconds, automatic
presetting starts from the frequency currently
displayed and proceeds toward the higher
frequencies.
♦
BUS;VeR2 VCR1 V-AUX DTU^CBl [)VE* MapD-S ^iUNER,,.., CD,., PHONO
I
«no ffltt......... Mtwon/’ VOLUME
S 7 . 5 H H z
When automatic preset tuning is completed, the front
panel display shows the frequency of the lust preset
station.
Notes
• Any stored station data existing under a preset number is
cleared when you store a new station under that preset number.
• If the number of received stations does not reach 40 (E8).
automatic preset tuning has automatically stopped tifler
searching all stations.
• Only FM stations with sufficient signal strength are stored
iiutornatically by automatic preset tuning. If the slalion you
want to store is weak in signal strength, tune into it manually,
and store it by followdiig the procedure in “Manually presetting
stations”.
Automatic preset tuning options:
You can select the preset number from which this unit w ill
store FM station.s and/or begin tuning toward low'er
frequencies.
After pressing MEMORY in step 3:
1 Press A/B/C/D/E, then PRESET/TUNING/CH <1 / >
to select the preset number under which the first station
will be stored. Automatic preset tuning will stop when
station.s have all been stored up to E8.
2 Press PRESET/TUNING (EDIT) to turn off the colon
{:) and then press PRESET/TUNlNG/CH <1 to begin
tuning toward the lower frequencies.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is set in the standby
mode, the power cord is disconnected from the AC
outlet, or the power supply is temporarily cut due to
power failure. However, if the pow er is cut for more
than one week, the preset stations may be cleared. If
so, store the stations again by using the presetting
station methods.
■ Manually presetting stations
You can also store up to 40 stations (8 stations in 5 groups,
A1 through E8) manually.
See page 38 for tuning instructions.
N i l 6 3 0 k H z
When tuned into a station, the front panel display
show s the frequency of the station received,
2
Press MEMORY (MAN’UAUTO FM).
The MEMORY indicator flashes for about 5 seconds.
Flashes
3
Press A/B/C/D/E (NEXT) repeatedly to select
a preset station group (A to E) while the
MEMORY indicator is flashing.
The group letter appears. Check that the colon {:)
appears in the front panel display.
A/B/C/D/E
<SQ>
♦
DVR;VeR2 VCR1 V-aUX D1
J J , i i P I I 6 3 0 k H z
Preset group
40