Advanced operations, Selecting the osd mode, 1 turn on the video monitor connected to this unit – Yamaha HTR-5860 User Manual
Page 62: Using the steep timer, Setting the sleep timer, Full display, Short display, Display off, Press sleep repeatedly to set the amount of time, Selecting the osd mode using the sleep iimer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/653434/62/background.png)
ADVANCED OPERATIONS
Selecting the OSD mode
You can display this unit’s operating information on a
video monitor. If you display the SET MENU and sound
field program parameter settings on a monitor, it is much
easier to see the available options and parameters than it is
by reading this information on the front panel display.
1
Turn on the video monitor connected to this
unit.
Using the steep timer
Use this feature to automatically set this unit in the
standby mode after a certain amount of time. The sleep
timer is useful when you are going to sleep while this unit
is playing or recording a source. The sleep timer also
automatically turns off any external components
connected to AC OUTLET(S).
■ Setting the sleep timer
Z Press ON SCREEN repeatedly to change the
OSD mode.
The OSD mode changes in the
following order: full display, short
display, and display off.
Full display
Always shows the sound field program parameter settings
as w ell as the contents of the front panel display.
Short display
Briefly Show' S the contents of the front panel display at the
bottom of the screen each time you operate this unit.
Display off
Only operations performed using ON SCREEN are
displayed. The OSD is displayed when using SET MENU
even if the OSD mode is set to “Display off’.
P04 miETHEPTER
' PE
vh
МIS:
м
МS:
yi'iufi
P
04
HOUIE THEPTER
Full display
Short display
Notes
• The OvSD signal is not output to Ihe REC OUT jack, and will
not be recorded.
• You can set the OSf) to turn on (gray background) or off w-'heii a
video source is not being reproduced (or the source component
is turned off) by using [)ISPLAY SET (see page 70).
• When only the component video signals arc input, tire OSD is
not displayed if the OSD mode is set to "Short display". To
display the OSD witli component video signal input, set the
OSD mode to “Full display" while GRAY BACK in DISPLAY
SET (see page 70) is set to AUTO.
1
Select a source and start playback on the
source component.
Press SLEEP repeatedly to set
the amount of time.
Each time you press SLEEP, the front
panel display changes as shown
below. The SLEEP indicator flashes
while switching the amount of time
for the sleep timer.
-A SLEEP ITOinin
SLEEP POmiii
SLEEP OFF C SLEEP .fOmin U SLEEP 6()niin
ii-EEP 12Eir-iin
The SLEEP indicator lights up in the front panel
display, and the di.splay returns to the selected sound
field program.
SLEEP indicator
I
DVftiVCRJ VCR1 V-AUX OTV/CEIL DVD
gp ^ IciSir.MA-HtS
Tl
58