Yamaha HTR-5860 - Manual (Page 9)

CONTROLS AND FUNCTIONS
® OPTIMIZER MIC jack
Use to connect and input audio signals from the supplied
microphone for use with the AUTO SETUP function (see
page 24).
© n PHONES (SILENT CINEMA) jack
Outputs audio signals for private listening with
headphones. When you connect headphones, no signals
are output to the PRE OUT jacks or to the speakers.
All Dolby Digital and DTS audio signals are mixed down
to the left and right headphone channels.
© SPEAKERS A/B
Turns on or off the set of front speakers connected to the A
and/or B terminals on the rear panel each time the
corresponding button is pressed.
© STRAIGHT (EFFECT)
Switches the sound fields off or on. When STRAIGHT is
selected, input signals (2-channel or multi-channel) are
output directly from their respective speakers without
effect processing.
© PROGRAM
Use to select sound field programs or adjust the bas.s/treble
balance (in conjunction with TONE CONTROL).
© TONE CONTROL
Use to adjust the bass/treble balance for the front left and
right, center, presence and subwoofer channels (see
pages 31).
© INPUT MODE
Sets the priority (AUTO, DTS, ANALOG) for the type of
signals received w'hen one component is connected to two
or more of this unit’s input jacks (see page 36).
© INPUT selector
Selects the input source you want to listen to or watch.
@ MULTI CH INPUT
Selects the source connected to the MULTI CH INPUT
jacks. When selected, the MULTI CH INPUT source takes
priority over the source selected with INPUT (or the input
selector buttons on the remote control).
© VIDEO AUX jacks
Input audio and video signals from a portable external
source such as a game console. To reproduce source
signals from these jacks, select V-AUX as the input
source.
Available only when the unil is in the XM Satellile Radio
mode (see page 43).