Cisco 3825 - Manual (Page 18)

1-8
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Chapter 1 Overview of the Cisco 3825 Mobile Wireless Edge Router
Cisco IOS Software Features
Configuration Statements for CISCO-IP-RAN-BACKHAUL-MIB
This section contains detailed information on how to enable notifications provided by the
CISCO-IP-RAN-BACKHAUL-MIB.
With Cisco IOS Release 12.4(16)MR1, the Cisco 3825 router supports the following MIB:
CISCO-IP-RAN-BACKHAUL-MIB
This MIB is compatible with Cisco Mobile Wireless Transport Manager (MWTM) 5.0 or later. It
provides information on the optimization on the optimization of the following traffic types:
• GSM—providing information between a BTS and the corresponding BSC
• UMTS—providing information on optimization between a Node Band the corresponding RNC.
NOTIFICATIONS
ciscoIpRanBackHaulGsmAlarm
Provides information alarms associated with Global System for Mobile Communications (GSM)-Abis
interfaces. Only enables GSM Abis. See
Appendix A, “Cisco 3825 Mobile Wireless Edge Router
RAN-O Command Reference” for more information.
conf t
snmp-server enable traps ipran alarm-gsm
ciscoIpRanBackHaulUmtsAlarm
Provides information alarms associated with Universal Mobile Telecommunications System
(UMTS)-Iub interfaces. Only enables UMTS Iub. See
Appendix A, “Cisco 3825 Mobile Wireless Edge
Router RAN-O Command Reference” for more information.
conf t
snmp-server enable traps ipran alarm-umts
ciscoIpRanBackHaulRcvdUtil + ciscoIpRanBackHaulSentUtil
Provides information on backhaul utilization. Only enables backhaul utilization. See Appendix A,
“Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference” for more information.
conf t
snmp-server enable traps ipran util
Note The snmp-server enable traps ipran util command is obsolete. CLI accepts the command to maintain
compatibility.
To specify all notifications, specify the component name. See Appendix A, “Cisco 3825 Mobile
Wireless Edge Router RAN-O Command Reference” for more information.
conf t
snmp-server enable traps ipran
The following configuration statements are used to provide additional information about device and
control generation of notifications:
ipran-mib ?
backhaul-notify-interval Interval for backhaul utilization (Obsolete.
Provided only to maintain compatibility.)
location Location of device
snmp-access Specify type snmp connectivity