KEYENCE DL-PD1 - Manual (Page 19)

2-1 Installation and Connection to a Sensor Amplifier
2-5 - PROFIBUS DP Compatible Network Unit DL-PD1 User's Manual (GT2) -
Con
nect
io
n a
nd
Co
nf
igu
ra
tion
2
 Connecting to a large display type sensor amplifier
1
Connect the optional expansion cable (OP-35361) between the sensor
amplifier and the DL-PD1.
2
Remove the sensor amplifier connector (for DIN rail mounting type) from the
DL-PD1, using pliers. In its place, attach the expansion connector sticker
supplied with the DL-PD1.
• Turn off the power and connect the expansion cable securely. If the
cable is not correctly connected, the DL-PD1 may be damaged
when the power is turned on.
• Do not attach or detach the cable with the power on, as this may
damage the DL-PD1.
Detach the
protection sticker.
Detach the
protection
sticker.
Expansion cable (cable length:300 mm)
NOTICE
Sensor amplifier connector
(for DIN rail mounting type)
Expansion
connector sticker