KEYENCE SR-750 Series - Manual

1 E SR-750 UM
Fixed Mount 2D Code Reader
SR-750 Series
User's Manual
Rev.4.0
„ Symbols
This user's manual uses the following symbols that alert you to important
messages. Be sure to read these messages carefully.
Important Cautions as to operation that is always performed are shown.
Point Cautions as to operation that can be easily performed incorrectly
are shown.
Reference
Matters that will help the user improve understanding of the text and
useful information are shown.
The items and pages to be referred to in this document are shown.
Introduction
This instruction manual describes the connection/wiring procedure, setting
instructions, and precautions for using the "SR-750 Series 2D Code Reader".
Please read this manual thoroughly before using the SR-750 Series to ensure
optimum performance. Keep this manual handy for quick future reference.
Read this manual together with the SR-750 Series Additional Functions Manual.
Read this manual before use.
Keep this manual in a safe place for future reference.
DANGER
It indicates a hazardous situation which, if not avoided, will result
in death or serious injury.
WARNING
It indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
It indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NOTICE
It indicates a situation which, if not avoided, could result in
product damage as well as property damage.
300GB
Table of Contents
General Precautions.......................................................................... 2
Safety Information for SR-750 Series................................................ 2
1-1 Checking the Package Contents ....................................................... 3
1-2 Part Names and Functions ................................................................ 3
1-3 System Configuration and Setup Flow .............................................. 4
2-1 Connecting the Power Source........................................................... 6
2-2 Connecting the Control Cable and Wiring ......................................... 6
2-3 Connecting the Ethernet Cable ......................................................... 8
3-1 Using the SR-750 Series ................................................................... 9
3-2 Quick Calibration ............................................................................. 10
3-3 Alternate Function ........................................................................... 11
3-4 Test Mode........................................................................................ 12
3-5 Preset/Verification Function............................................................. 14
3-6 Multi-I/O Function ............................................................................ 14
3-7 Image Saving Function.................................................................... 16
3-8 Silent Mode...................................................................................... 18
3-9 SR-600 Compatible Output Mode ................................................... 19
3-10 Batch Setting Code.......................................................................... 20
3-11 Code quality verification function..................................................... 20
3-12 Duplicate reading prevention interval reset ..................................... 24
3-13 Edit data function/Edit image file name function.............................. 24
4-1 Reading Operations......................................................................... 26
4-2 Timing Mode.................................................................................... 26
4-3 Data Transmission Timing............................................................... 27
4-4 Read Mode ...................................................................................... 28
5-1 Installing, Starting, and Shutting Down............................................ 30
5-2 Screen Layout ................................................................................. 33
5-3 AutoID Network Navigator Operation Flow...................................... 34
5-4 Details of Settings View................................................................... 34
5-5 Sending/Receiving Configuration .................................................... 49
5-6 Saving/Reading a Configuration File ............................................... 49
5-7 Quick Setup Code ........................................................................... 50
5-8 Terminal........................................................................................... 50
5-9 LiveView .......................................................................................... 51
5-10 ImageView....................................................................................... 52
5-11 FileView ........................................................................................... 53
5-12 Installation Guide............................................................................. 53
5-13 Export Reader Configuration ........................................................... 54
5-14 Report Generator Function.............................................................. 55
5-15 Creating Reports for the SR-750 Series.......................................... 56
6-1 Before Mounting the SR-750 Series................................................ 60
6-2 Mounting the SR-750 Series ........................................................... 60
6-3 Adjusting the Mounting Position ...................................................... 61
6-4 Confirming the Reading Stability ..................................................... 61
7-1 Communication of the SR-750 Series ............................................. 63
7-2 Data Communication Format........................................................... 63
7-3 RS-232C Communication................................................................ 67
7-4 Ethernet Communication ................................................................. 68
7-5 Socket Communication.................................................................... 69
7-6 FTP Communication........................................................................ 69
8-1 Details of Command Communication .............................................. 71
8-2 Operation Commands ..................................................................... 71
8-3 Details of Configuration Commands................................................ 75
9-1 PLC Link .......................................................................................... 85
9-2 Configuration ................................................................................... 85
9-3 Device Assignment.......................................................................... 87
9-4 Reference Program ......................................................................... 90
9-5 PLC Link Error ................................................................................. 91
10-1 Master/Slave function ...................................................................... 92
10-2 Setting procedure ............................................................................ 92
10-3 Multi drop link mode ........................................................................ 93
10-4 Multi head mode .............................................................................. 93