KEYENCE SR-750 Series - Manual (Page 115)

115 E SR-750 UM
14-2
Using FileView
Software that isolates the FileView software function from AutoID Network
Navigator. Without starting AutoID Network Navigator, you can manipulate image
data and configuration files stored in the SR-750 Series RAM/ROM.
(1) Menu Bar
• System ······· Register readers.
• Settings ······ Select network cards.
• Help ··········· Confirm the version of FileView.
• File ············ Shut down FileView.
(2) Reader view
Displays the reader name, model and IP address of the SR-750 Series
connected to FileView.
• Click the indicator to change the status of communications between FileView
and the connected SR-750 Series.
(3) Remote Drive/File
Select the drive for Remote Drive and the file type to display in FileView.
(4) File list
Displays files selected in (3).
Right-click on the file name to display the menu, from where you can perform
[Open], [Delete], and [Save] operations.
(5) [Update] button
Updates the file list.
„ Notes for FileView
• While AutoID Network Navigator is running, FileView cannot be started.
• While FileView is running, AutoID Network Navigator cannot be started.
• The SR-750 Series cannot be controlled from FileView.
• Name the setting file "config.ptc" and send.
• Name the script file "Fmtset.lua" and send.
• File names other than the above cannot be used.
Lamp status Description
FileView and the SR-750 Series are communicating. Operations on
images saved to the SR-750 Series are available.
FileView and the SR-750 Series are not communicating. In this
status, operations on internal files are not available.
(4)
(2)
(3)
(5)
(1)