Manuelles einstellen der blende, 1 den modus-wahlschalter auf [manual] einstellen, 2 den regler [push] zweimal drücken – Panasonic NVDX100EG User Manual

Page 88: Zurückschalten auf die normale blende, Adjusting the iris (f number) manually, 1 set the mode selector switch to [manual, 2 press the [push] dial twice, 3 turn the [push] dial to adjust the iris, Range of iris adjustment, Returning to the normal iris value (f number)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

1/1000

OPEN

^OdB

DEUTSCH

ENGLISH

Manuelles Einstellen der Blende

Zum Erzielen spezieller kreativer Effekte, oder für

spezielle Beleuchtungssituationen oder Motive mit viel
schneller Bewegung, können Sie auch die Blende

manuell regeln.

1

Den Modus-Wahlschalter auf [MANUAL]

einstellen.

Die Anzeige [MNL] erscheint.

2

Den Regler [PUSH] zweimal drücken.

Die Anzeige [►F] erscheint.

3

Den Regler [PUSH] drehen, um die

Blende zu regeln.

Einstellbereich für die Blende

CLOSE (geschlossen) -» F16.0...F1.7 -» OPEN

(voll geöffnet) +0dB...+18dB

Je näher bei [CLOSE] die gewählte Einstellung ist, desto
dunkler wird das Bild.

Je näher bei [OPEN] die gewählte Einstellung ist, desto

heller wird das Bild.
Die Zahlen mit +dB zeigen Aufhellungswerte an. Wenn
Sie einen zu hohen Wert wählen, kann sich die
Bildqualität verschlechtern.

Zurückschalten auf die normale Blende
Den Modus-Wahlschalter auf [AUTO] einsteilen.

♦ Durch manuelles Einstellen der Verschlußzeit {-»

86)

nach manuellem Regeln der Blende wird die Blende

auf automatische Einstellung zurückgestelit. Wenn Sie
daher sowohl die Verschlußzeit als auch die Blende

manuell einstelien möchten, müssen Sie unbedingt

zuerst die Verschlußzeit und dann die Blende regeln.

❖ Wenn Sie die Blende geregelt haben, ist es nicht

möglich, einen Belichlungsautomatik-Programm-
Modus ([ ^ ], [Ä^] oder [«]) oder den Aufhellungs-
Modus [GAINUP] im Menü [MENU (D.EFFECT)] zu

wählen.

Adjusting the Iris (F Number)

Manually

To achieve special creative effects or to cope with special

lighting situations or fast-action scenes, you can adjust

the iris (F number) manually.

1

Set the Mode Selector Switch to

[MANUAL].

The [MNL] Indication appears.

2

Press the [PUSH] Dial twice.

The [►F] Indication appears.

3

Turn the [PUSH] Dial to adjust the iris.

Range of Iris Adjustment
CLOSE (Closed) F16.0...F1.7 •¥ OPEN (Opened)

+0dB...-h18dB
The nearer to [CLOSE] a value you select, the darker the

picture becomes.

The nearer to [OPEN] a value you select, the brighter the

picture becomes.

The figures with -rdB show the Gain-up value, if you

increase the value too much, the picture quality

deteriorates.

Returning to the Normal Iris Value (F Number)

Set the Mode Selector Switch to [AUTO].

♦ Manually adjusting the shutter speed (-#

86) after

performing manual iris adjustment changes the iris
back to automatic adjustment.

Therefore, if you want to adjust both the shutter speed

and iris manually, be sure to adjust the shutter speed

first.

♦ If you have adjusted the iris, it is not possible to select

a Programme AE Mode ([ ^ 1, [fin! or [*]) or the

Gain-up Mode [GAINUP] on the [MENU (D.EFFECT)]
Menu.

-88-

Advertising