Toshiba – Toshiba LF434 User Manual
Page 110
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TOSHIBA
6 F 8 A 0 7 7 0
10.1 Digital I/O Sped fica tions
DigilHl I/O Specifications for the LF4C4 converter are described below:
■ Digital Output KDOIJ (standard)
Output type: Transistor open collector
Number of outputs:
1
Capaeity:
3Ü V dc, 2ÜÜ mAmaximujii
■ Digital Output 2(DOZ ) (option),
Output lype:
SolidsUUe relay (non polarity)
Number of outputs; 1
Capacity:
50 V dc, 150 mA maximum
■ Digital Input (Dl ) (option),
inpul signal: 20 to 30 V dc voltage signal
* High input level—20 to 30 V dc
• I^w input level—2 V dc nmimuin
Input resistance:
ApproxiiriiUely 2,7 k
Number of iopuls: One point
• l£adi I/O terminal can be used as a specified function terminal when selected.
• Terminal COM is the signal COMMON for Ihc other three terminals (DOl, D02 and Dl).
• Fach lerminal is isolated from Ihe internal circuits,
frhe output terminals are noi isolaled from each other.)
-
109
-