Toshiba – Toshiba LF434 User Manual
Page 60
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TOSHIBA
6 F . 8 A 0 7 7 0 .
(3) Unit of spurt
One of the following engineering units as a unit for the span can he selected. The unit is sci
for the range 1 and the same unit applies autoinaiiealiy to other ranges—range
2 ,
range 3
and range 4,
* Flow veloeUy:
lo/s, (ft/s)
* Flow rate:
rnVs, mVmin, mVh, mVd
1/s, 1/min, L'li, 1/d
nifi's, rnl/min, ml/Jt, ml/d
(hbl/s), (bbJ/min), (bbJ/h), (bbl/d)
(gal/min), (gal/h), (gal/d)
Units in parentheses, such as "bbr, "gal” and “ft'’ arc shown only when the meter si/e is
selected in inches. They are not shown when the meter size is scJecied in mm,
if you change the unit, the new span based on the newly set unit will be automatically
displayed,
fJnly in case of the converter for special specifications (refer to 7,3.3 ' Converter for Special
specifications”), l ime units /d, and flow rate units bbl/s, bhl/miii, bbl/h, bbl/d, bbl can be
selected.
59
-