Toshiba LF434 - Manual (Page 112)

TOSHIBA
6 F 8 A 0 7 7 0
continued from previous pa&e
Clear (reset) the totalizer»
■ Clear (reset) the totalizer by pressing [ ► ] key.
If you have changed the counting rate, clear (reset) the totalizer before you start the
totalizer
Start the totalizer.
Start the totalizer by pressing J key and make sure*‘C’ is shown on the display.
(Note 3)
Notes:
1
,
When the flowmeter has no optional digital input function (ninth column of Type
Specification Code; T), the movement of the totalizer iiiid pulse output after power on is
decided by setting comciits ofopiional digital input (Dl)and digital input detective level.
Necessary, set the D1 function as “0: NO USC”.
To let them start, operate the control keys on the panel (Option) according to Totalizer
Operation in the next subsection.
2 . И is preferable to set the indicating unit (UNIT 1 and'^or UNIT 2) to one of the units ap­
propriate for totalization just to make sure it is operating correctly.
3. if the indicating unit (UNIT 1 and/or UNIT 2) is not the one for totalization, "C " does not
appear on the display.
4. Example for counting rate:
Example
Case Range :3600m"Vh (Im^/s)
Counting raic(pulsc rate)
Min.; 3briQ(mVh)/36fX1000(pulKes/li)=0. OQl m^=l I
Max : 36(Ю(Л1 Vh) / 3.6(pulses,/h) ^1000
- i n -