Safety precautions for maintenance and inspection, Disclaimer, Caution – Toshiba LF434 User Manual

Page 5: Toshiba

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

TOSHIBA

6 F 8 A 0 7 7 0 :

SAFETY PRECAUTIONS (contiaued)

Safety Precautions for Maintenance and Inspection

âs

CAUTION

■ Turn off mains power before

conducting wiring work.

Wiring while power is ap-
plied can cause electric shock,

DO

Ground (he LF434/LF404 indepen­

dently from power equipment.

Operating this product without

grounding can cause electric

PQ shock or malfunction.

■ Do not conduct wiring work with bare

hands.

Rcma i n i n g cJ cetr ic charge

(

even if pov-'cr is turned off

^

can still cause electric shock.

DONT

■ Use compression terminal lugs with

insulation sleeve for the terminal

block and GND terminal.

1.0QSC connections can cause

electric shock, fire from

excessive current or system
malfunction.

Do not work on piping and wiring with

wet hands.

Wet hands may result in

f

electric shock,

DON'T

The label shown left is placed

near the terminal board for

power input.

/

i \ (A black border and symbol on

yellow triangle)
Be alert to electric shock.

Do not touch the flowmeter main

body when high temperature fluid is
being measured.

The fluid raises the main

i

body temperature and can

^

cause bums when touched.

DON’T

Do not conduct wiring work when

power is applied.

Wiring while power is applied

I

can cause electric shock,

DONT

■ Do not conduct wiring work with wet

hands.

1^0

Wet hands may result in

elccrric shock.

DONT

1

be label shown left is placed

* near the terminal board for

power inp ut.

\

(A black border and symbol on

yellow triangle)
Be alert to electric shock.

■ Do not use a fuse other than the one

specified.

Using a fuse other than the

j one specified can cause

j/

system failure, damage or

malfunction,

DONT

Use a rated fuse as follows:

Fuse rating:

^ lA/^.'inV for lilt) to 240Vac or

1 liiVdc

* 2A/2.^0V for 24 Vdc

Dimensions:

Diameter

5.2

mm x 20 mm

Melting time characteristic:

Normal blow j

Disclaimer

Toshiba does not accept liability for jny damage or loss, material or personal, caused as a

direct or indirect result of the operation of this product jii connection with, or duo to, llie

occurrence of any event of force majenre (including fire or earthquake) or the misuse of

this product, whether inicnclonal or accidentaL

-

4

-

Advertising