Toshiba LF434 - Manual (Page 66)

TOSHIBA
. 6 F 8 A 0 7 7 0
Dampin}; Constant
The damping const an l is used to moderate output i1uct nations. (The larger the damping
constam> the more tiic output is averaged. But the response to an input change will be
slower.) The damping constant can be set as follows:
0.0 sec, 0.5 sec and 1 to 60 sec (in incremeots of 1 second)
Note: C.O see setting will ’i^'ork as equal to 0.1 see damping constant.
Setting value exceeding 60 sec will be automatically set to 60 see.
Proceed as follows to check or change the damping constant.
■ To check the dninping constant:
Key o]>cration Display example DescriptioD
SF.T
□
Dl: DAMPING
OZ. 0 s
Press [SET] first to start the ileins selection se­
quence and select Dl: DAMPING from among the
configuration items using [ > ] and [
a .
] keys.
Then press [SLTj again to display the current
damping constant.
SET
□
Dl : DAMPING
Pressing [SET], the system returns to the items
selection sequence.
-
65
-