S.2.4 indicating unit, Notes, Toshiba – Toshiba LF434 User Manual
Page 54
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TOSHIBA
6 F 8 A 0 7 7 0
S.2.4 Indicating Unit
You can seleci one ot Ihe 29 engineering units Jisted below as mt indicating unit.
• Now velocity:
m/s, (fl/s)
• Flow rate:
mVs» mVirrin, mVh, mVd
l/s, 1/min, 111, 1. d
ml/s, ml/min, ml/h, ml/d
(bbl/y), (bbl/min), (bbl/h), (bbl/d)
(gal/s), {gal/inin), (gai/h), (gat/d)
• Volumetric flow:
1, ml, (gai)
(totalized flow)
• Other units:
COUNT (totalized flow without a unit), RANGE (1 to 4)
Code of volumetric
flow direction: F(fixed forward How), R(fixed reverse flow),
Bfautomatic selection bi-directional flow) )
Notes
1. Units in parentheses, such as '‘bbl”, and '■‘ft'’ arc show^n only when the meter si/c is
selected in inches. They arc not shown when the meter size is selected in mm.
2 .
If COUNT or liANGE is selected, the display is shown as follows:
COUNT: displays totalized flew counts (8 digits) without a unit,
RANGE: displays the range number (1 to 4),
3. Only in case of the converter for special specifications (refer to
1 3 3
"‘Converter for
Special specifications”),
‘Time units /d, and flow rate units bbl/s, bbl/min, bb]/h, bbl/d, bbl can he selected,
‘Code of volumetric flow' direction F(fixcd forward flow'), R(fixcd reverse flow),
B(automaiic selection bi-directional flow) can be selected.
Two indicating units (primary unit: UNIT 1, secondary unit: UNIT 2) can be seJeaed.
Proceed as follow^s to check or change these tw'o indicating units.
-
5 3
-