Toshiba LF434 - Manual (Page 50)

TOSHIBA
6 F 8 A 0 7 7 0
8*2*2 Meter Si/e
Proceed as iollow's to check or change the meter size of the detector.
■ To check the meter size:
Key operation Display example Description
SET
□
AZ: METER SIZE
50 min
Press [SET] first [0 start the items selection sequence
and select A2: METER SIZE from among the
configuration items using [ ► j and [ ^ ] keys Then
press [SET] again to display the current meter size.
SHT
□
METER SIZE Pressing [SET], the system returns to the items
selection sequence.
-
49
-