Toshiba LF434 - Manual (Page 95)

TOSHIBA
6 F 8 A 0 7 7 0
■ To ch^nye the password:
The foJlowing example shows how to change the passw'ord from 123 mm lo 453 mm.
Key operation Display example Description
SET
□
A4: PASSWORD
123
Press [Sh'r] first to start the items selection
sequence and select A4: PASSWORD from among the
configuralion items using [ ► \ and [ a ] keys. Press
[SET] again to display the current password (123 in
thLs example).
Case of inputting wrong password in the
password input inode, the current password
doesn’t appear, but “***•* appears.
►
□ A4: PASSWORD
iZ3
Pressing [ ► ], the cursor appears. Then press [ ► ]
as many limes as necessary to move the cursor to digit
to be changed.
▲ ►
A4: PASSWORD
423
453
Change the value by pressing [ a ]. Then move the
cursor lo another digit by pressing [ ► j and change
the value, lu this example repeat this process until the
display shows "‘453'’ (Note)
stn
□ A4: PASSWORD
456
Pressing [SET], the cursor disappears and the changed
display flickers. Press [SET] again to save the value,
SET
□ M: PASSWORD
Pressing [SET], the system returns to the items se­
lection sequence.
Note:
1. Setting ‘‘OOir lo the password, password input mode doe,sn’l appear and all
configuration parameter and calibrate can be changed,
2. It password is set, do not forget the passw^ord. In case of forgetting passw'ord,
refer to next page, readout the password, But I he administration, including
the w'ay to readout password,
<Notice>
The method of PASSWORD MANAGTMEiNT including iis lifting or reading out requires
lobe controlled by our system's own risk.
- 9 4 -