Toshiba – Toshiba LF434 User Manual
Page 68
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TOSHIBA
6 F 8 A 0 7 7 0
8.2*7 Lovt Cutoff
The low cuioff is Ihc value set just alxjvc
0 %
flow rale. Flow rates below this level are
treated asO% and subsequent outpuLs as
{ ) %
ojirent output. The low cutoff Ciin be set from
0 to
1 0 %
of the span and in in ere meats of 0,1%.
Proceed as follows to check or change the low cutoff value.
■ To check the low cutoff value:
Key operation
Display example
Description
SRT
□
D2; LOW CUT
01.
Ù %
Press [SET] first to start the items selection sequence
10 select D2: LOW CUT from among the configuration
items using [ ► ] and [
a
] keys. Press [SET] again to
display the current low cutoff value.
SET
□
D l :
LOW CUT
Pressing [SET], the system returns to the items
^election sequence.
-
67
-