Canon MARKLL WUX10 - Manual (Page 25)

Projector WUX10 MarkII User Commands
- 21 -
Revision History / Date Changes Revised by Approved by
BLANK
BLANK function
Format
BLANK=<BLANK parameter:ID>
GET□BLANK / ?△BLANK
<BLANK parameter:ID>
ON BLANK ON
OFF BLANK OFF.
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
"i:OK" is returned if the parameter was set properly.
For '
GET BLANK ' or ' ?BLANK ', current BLANK status is returned as
' g:BLANK=ON '
'
g:BLANK=OFF
'
For details on other responses, refer to the "Error List".
Description
(1) This command is used to set the BLANK function.
(2) This command is identical to pressing the “VOL+” and "VOL-" button.
(3) The current BLANK settings can be obtained using the GET command. ("
GET BLANK ")
Example
Setting
> BLANK=ON BLANK is set to ON.
< i:OK
Reference
> GET BLANK or ?BLANK
The current BLANK status is referenced.
< g:BLANK=ON
* Commands are indicated by ">", and responses are indicated by "<".