Canon MARKLL WUX10 - Manual (Page 52)

Projector WUX10 MarkII User Commands
- 48 -
Revision History / Date Changes Revised by Approved by
LEDILLUMINATE
Emotional LED lighting control
Format
LEDILLUMINATE=<LED lighting control setting parameter:ID>
GET□LEDILLUMINATE / ?△LEDILLUMINATE
<LED lighting control setting parameter:ID>
ON This sets the LED display to ON.
OFF This sets the LED display to OFF.
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
"i:OK" is returned if the parameter was set properly.
For '
GET LEDILLUMINATE ' or ' ?LEDILLUMINATE ', current emotional LED lighting setting is returned as
'g:LEDILLUMINATE=<LED lighting control setting parameter:ID>'
For details on other responses, refer to the "Error List".
Description
(1) This command is used to control the lighting of the emotional LED.
(2) This command functions in the same way as when "System setting" - "LED illumination" are
selected on the menu.
(3) The current LED illumination setting can be obtained using the GET command. ("
GET
LEDILLUMINATE ")
Example
Setting
> LEDILLUMINATE=ON
The LED display is set to ON.
< i:OK
Reference
> GET LEDILLUMINATE or ?LEDILLUMINATE
The ON or OFF setting for the LED display is obtained.
< g:LEDILLUMINATE=ON
* Commands are indicated by ">", and responses are indicated by "<".