Canon MARKLL WUX10 - Manual (Page 5)

Projector WUX10 MarkII User Commands
- 1 -
Revision History / Date Changes Revised by Approved by
1. Overview
These specifications describe the methods of controlling the Projector WUX10 MarkII from the PC over
an RS-232C connection or LAN.
Virtually all operations possible with the remote control can be controlled from the PC.
The following symbols are used in these specifications:
Symbol Description
△ Space with 0 or more characters (20h), Tab (09h), or other separator.
□ Space with 1 or more characters (20h), Tab (09h), or other separator.
▽ Separator between parameters △ , △ | □.
[ ] Data in [ ] can be omitted.
| Same as OR.
：＝
Definition name is on the left side of this mark, and definition description is on the right side.