Canon MARKLL WUX10 - Manual (Page 53)

Projector WUX10 MarkII User Commands
- 49 -
Revision History / Date Changes Revised by Approved by
LMPT
Lamp time inquiry
Format
GET□LMPT / ?△LMPT
LMPT=<ｈｈｈｈ>:<mm>
<hhhh>
Hours 0～65565
<mm>
Minutes 00～59
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
For '
GET LMPT
' or '
?LMPT
', current lamp time is returned as
'
g:LMPT=<hhhh>：<ｍｍ>
'
For details on other responses, refer to the "Error List".
Description
(1) This inquires the lamp time. Value of 0h0m to 65565h59m is returned.
(2) Because inner equivalent value is returned, the hour of the lamp is not the same as the actual
hour.
(3) This inquiry can be executed during stand-by.
(4) There are no setting commands available.
Example
Setting
None
Reference
> GET LMPT
This retrieves the lamp time.
< g:LMPT=12：34
12 hours 34 minutes
* Commands are indicated by ">", and responses are indicated by "<".