Canon MARKLL WUX10 - Manual (Page 76)

Projector WUX10 MarkII User Commands
- 72 -
Revision History / Date Changes Revised by Approved by
SIGNALSTATUS
Signal status inquiry
Format
GET□SIGNALSTATUS / ?△SIGNALSTATUS
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
Current image signal input status is returned as
'g:SIGNALSTATUS=<Signal status:ID>'
<Signal status:ID>
Signal status
Meaning
NO_SIGNAL Signal not detected
DISPLAYING Image now displayed or display enable status
SETTING Signal detection and display preparation in progress
For details on other responses, refer to the "Error List".
Description
(1) This inquires about the current image signal input status.
(2) This returns the signal status of the selected input. Use INPUT command for the input
selection.
(3) "e:1006:NOW_BLANK" is returned during blanking.
Example
> GET SIGNALSTATUS or ? SIGNALSTATUS
< g:SIGNALSTATUS=NO_SIGNAL
* Commands are indicated by ">", and responses are indicated by "<".