Temp – Canon MARKLL WUX10 User Manual
Page 77
Projector WUX10 MarkII User Commands
- 73 -
Revision History / Date
Changes
Revised by
Approved by
TEMP
Temperature inquiry
Format
GET□TEMP
<n>
Number
0 to 255
<v>
Temperature value 0.0 to 127.9 °C
Environment
Power
Input
OFF ON PM
D-RGB A-RGB1 A-RGB2 COMP
VIDEO
HDMI
None
X O X
-
Response
Temperature is returned as '
g:TEMP=<n>{,<v>}
'
For details on other responses, refer to the "Error List".
Description
(1) This inquires about the temperature sensor value.
(2) Number of temperature sensors varies according to model.
(3) When returning multiple temperature sensor values, values will be separated with a comma.
There are cases when a number of sensors is 0. In this case, there will not be a comma.
(4) For correspondence of temperature sensor sequence and actual installation location, inquire
separately.
Example
Setting
None
Reference
> GET TEMP
This retrieves the temperature sensor values.
< g:TEMP=5,37.1,63.0,38.9,29.7,32.4
* Commands are indicated by ">", and responses are indicated by "<".