Canon MARKLL WUX10 - Manual (Page 72)

Projector WUX10 MarkII User Commands
- 68 -
Revision History / Date Changes Revised by Approved by
SCRNASPECT
Screen aspect setting
Format
SCRNASPECT=<Screen aspect setting parameter:ID>
GET□SCRNASPECT / ?△SCRNASPECT
<Screen aspect setting parameter:ID>
4:3 4:3 display
16:9 16:9 display
4:3_DIS 4:3 digital image shift
16:9_DIS 16:9 digital image shift
16:10 16:10 display
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
"i:OK" is returned if the parameter was set properly.
For 'GET SCRNASPECT' or '?SCRNASPECT', current screen aspect setting is returned as
'g:SCRNASPECT=<Screen aspect setting parameter:ID>'
For details on other responses, refer to the "Error List".
Description
(1) This sets the screen aspect.
(2) This command functions in the same way as when "Display setting" - "Screen aspect" are
selected on the menu.
(3) The GET command can be used to retrieve the current screen aspect. ("
GET SCRNASPECT
")
(4) The final screen aspect settings are retained even when the power is turned off.
Example
Setting
> SCRNASPECT=16:9 This sets the screen aspect to 16:9.
> i:OK
Reference
> GET SCRNASPECT or ?SCRNASPECT This retrieves the screen aspect.
< g:SCRNASPECT=4:3
* Commands are indicated by ">", and responses are indicated by "<".