Canon MARKLL WUX10 User Manual
Page 67
Advertising
Projector WUX10 MarkII User Commands
- 63 -
Revision History / Date
Changes
Revised by
Approved by
Notes
(a) The power must never be turned off while this command is being executed!
(b) After the 'Factory settings,' be absolutely sure to turn the power off and then restart.
(c) NO_SIGNAL' may be returned as the response to the command after 'Current image adjustment reset' or
'System initial setting' has been executed.
Example
Control
> RESET LAMPTIME
This resets the lamp on time.
< i:OK
* Commands are indicated by ">", and responses are indicated by "<".
Advertising