Canon MARKLL WUX10 - Manual (Page 38)

Projector WUX10 MarkII User Commands
- 34 -
Revision History / Date Changes Revised by Approved by
FTONEADJ
Flesh tone adjustment
Format
FTONEADJ=<Flesh tone adjustment parameter:ID>
GET□FTONEADJ / ?△FTONEADJ
<Memory color adjustment parameter:ID>
OFF No adjustment
FTONE_L Flesh tone adjustment - light
FTONE_M Flesh tone adjustment - medium
FTONE_H Flesh tone adjustment - heavy
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
"i:OK" is returned when flesh tone has been adjusted successfully.
For '
GET FTONEADJ
' or '
?FTONEADJ
', current flesh tone adjustment is returned as
'g:FTONEADJ=<Flesh tone adjustment parameter:ID>'
For details on other responses, refer to the "Error List".
Description
(1) This command is used by selecting "No adjustment", "Flesh tone adjustment - light" to "Flesh
tone adjustment - heavy".
(2) This command functions in the same way as when "Image adjustment" - "Advanced
adjustment" - "Flesh tone adjustment" are selected on the menu.
(3) This sets the currently selected input signal and image mode.
(4) The current flesh tone adjustment setting can be obtained using the GET command. ("
GET
FTONEADJ ")
(5) With the WUX10, "Memory color adjustment" function is not available.
Example
Control
> FTONEADJ=FTONE_M
This sets the tone adjustment to "Flesh tone adjustment - medium".
< i:OK
Reference
> GET FTONEADJ or ?FTONEADJ
This retrieves the flesh tone adjustment level.
< g:FTONEADJ=FTONE_M
* Commands are indicated by ">", and responses are indicated by "<".