Commands – Canon MARKLL WUX10 User Manual
Page 8
Projector WUX10 MarkII User Commands
- 4 -
Revision History / Date
Changes
Revised by
Approved by
Commands
Request transmissions sent from PC to the projector.
Transmission format
△<Command character strings> △<Delimiters>
<Command character strings>
Character strings consisting of 0 or more alphanumeric characters.
<Delimiters>
One of CR (0Dh), LF (0Ah), CR+LF (0Dh+0Ah), Null (00h)
Type
Type
Description
Response
Commands with a command character string length of 0. No
command processing is performed.
■
OK
□
BUSY
■
WARN
■
ERR
Null Commands
Character string
<Null command character string>
:= <Character string with length 0>
Projector control command. The format is shown below.
■
OK
■
BUSY
■
WARN
■
ERR
Control
command
Character string
<Control command character string>
:= <Control name>□<Parameter value>
Command that sets values for each parameter. The format is
shown below.
■
OK
■
BUSY
■
WARN
■
ERR
Setting
command
Character string
<Setting command character strings>
:= <Parameter name>△=△<Parameter value>
For the definition of <Parameter value>, refer to "Parameter
definitions.
Requests current value of each parameter. The format is shown
below.
□
OK
■
BUSY
■
WARN
■
ERR
Reference
command
Character string
<Reference command character string>
:=?△<Parameter name> | GET□<Parameter name>