Canon MARKLL WUX10 - Manual (Page 41)

Projector WUX10 MarkII User Commands
- 37 -
Revision History / Date Changes Revised by Approved by
HPIX/VPIX
Horizontal/Vertical resolution adjustmen
Format
HPIX=<Horizontal resolution:Number>
VPIX=<Vertical resolution:Number>
GET□HPIX / ?△HPIX
GET□VPIX / ?△VPIX
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X O O O X X X X
Response
"i:OK" is returned if the parameter was set properly.
For '
GET HPIX
' or '
?HPIX
' ('
GET VPIX
' or '
?VPIX
'), current horizontal (vertical) resolution is returned as
' g:HPIX=<Horizontal resolution:Number> '
（ ' g:VPIX=<Vertical resolution:Number> '）
For details on other responses, refer to the "Error List".
Description
(1) This adjusts the horizontal and vertical resolution (number of dots) on the screen.
(2) This command functions in the same way as when "Display setting" - "Input signal settings" -
"Horizontal resolution adjustment" or "Vertical resolution adjustment" are selected on the
menu.
(3) If the input is neither "A-RGB1" nor "A-RGB2", 'e:200X INVALID_SOURCE(***)' is returned
as an error response.
(4) If signals are not input, 'e:2010 NO_SIGNAL' is returned.
(5) Adjustment range is limited. If number is invalid, "e:0801 INVALID_VALUE" is returned.
(6) The GET command can be used to retrieve the current horizontal and vertical position. ("
GET
HPIX " " GET VPIX ")
Example
Setting
> HPIX=1024
This sets the horizontal resolution to 1024.
< i:OK
Reference
> GET VPIX or ?VPIX
This retrieves the vertical resolution.
< g:VPIX= 864
* Commands are indicated by ">", and responses are indicated by "<".