Canon MARKLL WUX10 - Manual (Page 30)

Projector WUX10 MarkII User Commands
- 26 -
Revision History / Date Changes Revised by Approved by
CONT
Contrast setting
Format
CONT=<Contrast setting:Number>
GET□CONT / ?△CONT
Setting values for <Contrast setting:Number> are -20 to 20.
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
"i:OK" is returned if the parameter was set properly.
For 'GET CONT' or '?CONT', current contrast setting is returned as
' g:CONT=<Contrast setting:Number> '
For details on other responses, refer to the "Error List".
Description
(1) This sets the screen contrast.
(2) This command functions in the same way as when "Image adjustment" - "Contrast setting"
are selected on the menu.
(3) If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.
(4) This sets the currently selected input signal and image mode.
(5) The current contrast can be acquired using the applicable GET command. ("
GET CONT
")
Example
Setting
> CONT=3 This sets the contrast to +3.
< i:OK
Reference
> GET CONT or ?CONT This retrieves the contrast.
< g:CONT=3
* Commands are indicated by ">", and responses are indicated by "<".