Canon MARKLL WUX10 - Manual (Page 82)

Projector WUX10 MarkII User Commands
- 78 -
Revision History / Date Changes Revised by Approved by
WBRGB
Screen color correction (ADJUST)
Format
WBRGB=<R adjustment value:Number>▽<G adjustment value:Number>▽<B adjustment value:Number>
GET□WBRGB / ?△WBRGB
Setting values for <R/G/B adjustment value:Number> are -20 to 20.
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
"i:OK" is returned if the parameter was set properly.
For '
GET WBRGB
' or '
? WBRGB
', current screen color correction (adjustment) value are returned as
' g:WBRGB=<R adjustment value:Number>,<G adjustment value:Number>,<B adjustment value:Number> '
For details on other responses, refer to the "Error List".
Description
(1) This sets the RGB adjustment values of the screen color correction.
(2) This command functions in the same way as when "Display setting" - "Screen color correction"
- "RGB adjustment" are selected on the menu.
(3) If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.
(4) Although this setting is enabled when Adjustment (ADJUST) is selected by the screen color
correction command (WB), it can be made independently.
(5) The GET command can be used to retrieve the current RGB adjustment values. (" GET WBRGB ")
Example
Setting
> WBRGB=10, 11, 12
This sets R to 10, G to 11, and B to 12.
< i:OK
Reference
> GET WBRGB or ?WBRGB
This retrieves the RGB adjustment values.
< g:WBRGB=-10, 0, 19
* Commands are indicated by ">", and responses are indicated by "<".