Canon MARKLL WUX10 - Manual (Page 58)

Projector WUX10 MarkII User Commands
- 54 -
Revision History / Date Changes Revised by Approved by
PJON
Display screen at startup setting
Format
PJON=<Parameters for setting display screen at startup:ID>
GET□PJON / ?△PJON
<Parameters for setting display screen at startup:ID>
CANON Canon logo
SKIP No display
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
"i:OK" is returned if the parameter was set properly.
For '
GET PJON ' or ' ?PJON ', current display screen at startup setting is returned as
'g:PJON=<Parameters for setting display screen at startup:ID>'
For details on other responses, refer to the "Error List".
Description
(1) This sets the screen displayed at startup.
(2) This command functions in the same way as when "Display setting" - "User screen setting" -
"Startup screen" are selected on the menu.
(3) The GET command can be used to obtain the current screen displayed at startup. ("
GET PJON
")
Example
Setting
> PJON=CANON This sets the startup screen to “Canon logo”.
< i:OK
Reference
> GET PJON or ?PJON This retrieves the startup screen.
< g:PJON=SKIP
* Commands are indicated by ">", and responses are indicated by "<".