Canon MARKLL WUX10 - Manual (Page 40)

Projector WUX10 MarkII User Commands
- 36 -
Revision History / Date Changes Revised by Approved by
GUIDE
Guide setting
Format
GUIDE=<Guide setting parameter:ID>
GET□GUIDE / ?△GUIDE
<Guide setting parameter: ID>
ON Guide display ON
OFF Guide display OFF
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
"i:OK" is returned if the parameter was set properly.
For '
GET GUIDE ' or ' ?GUIDE ', current guide setting is returned as
'g:GUIDE=<Guide setting parameter:ID>'
For details on other responses, refer to the "Error List".
Description
(1) This command is used to set the guide function display to ON or OFF.
(2) This command functions in the same way as when "System setting" - "Guide" are selected on
the menu.
(3) The guide is cleared immediately when "GUIDE=OFF" is received while the guide is
displayed.
(4) The current guide setting can be obtained using the GET command. (" GET GUIDE ")
Example
Setting
> GUIDE=ON
The guide display is set to ON.
< i:OK
Reference
> GET GUIDE or ?GUIDE
The guide display setting status is obtained.
< g:GUIDE=ON
* Commands are indicated by ">", and responses are indicated by "<".