Canon MARKLL WUX10 - Manual (Page 46)

Projector WUX10 MarkII User Commands
- 42 -
Revision History / Date Changes Revised by Approved by
IMAGEFLIP
Flip display
Format
IMAGEFLIP=<Image flip setting parameters:ID>
GET□IMAGEFLIP / ?△IMAGEFLIP
<Image flip setting parameters:ID>
NONE None
CEILING Ceiling, Flip horizontally
REAR
Rear, Flip vertically
REAR_CEILING Rear ceiling, Flip horizontally and vertically
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
"i:OK" is returned if the parameter was set properly.
For '
GET IMAGEFLIP
' or '
?IMAGEFLIP
', current flip display setting is returned as
'g:IMAGEFLIP=<Image flip setting parameters:ID>'
For details on other responses, refer to the "Error List".
Description
(1) This command is used to flip the screen display in various ways (vertically or horizontally).
(2) This command functions in the same way as when "Display setting" - "Flip display" are
selected on the menu.
(3) When the display is flipped, the "keystone distortion" settings are initialized (set to VKS:0).
(4) The current flip display status can be acquired using the applicable GET command. ("
GET
IMAGEFLIP
")
Example
Setting
> IMAGEFLIP=REAR This displays the image backwards (flip vertically) on the screen.
< i:OK
Reference
> GET IMAGEFLIP or ?IMAGEFLIP This retrieves the flip display state.
< g:IMAGEFLIP=REAR_CEILING
* Commands are indicated by ">", and responses are indicated by "<".