Canon MARKLL WUX10 - Manual (Page 57)

Projector WUX10 MarkII User Commands
- 53 -
Revision History / Date Changes Revised by Approved by
NOSIG
Display screen when no signal setting
Format
NOSIG=<Parameters for setting display screen in no-signal mode:ID>
GET□NOSIG / ?△NOSIG
<Parameters for setting display screen in no-signal mode:ID>
BLACK Black screen
BLUE Blue screen
Environment
Power Input
OFF ON PM D-RGB A-RGB1 A-RGB2 COMP VIDEO HDMI None
X O X -
Response
"i:OK" is returned if the parameter was set properly.
For 'GET NOSIG' or '?NOSIG', current display screen when no signal setting is returned as
'g:NOSIG=<Parameters for setting display screen in no-signal mode:ID>'
For details on other responses, refer to the "Error List".
Description
(1) This sets the display screen when no image signals are input.
(2) This command functions in the same way as when "Display setting" - "User screen setting" -
"Screen when no signal" are selected on the menu.
(3) The GET command can be used to obtain the current display screen at no signal. ("
GET NOSIG
")
Example
Setting
> NOSIG=BLUE This sets the “Blue” screen when no signals are input.
< i:OK
Reference
> GET NOSIG or ?NOSIG This retrieves the screen when no signals are input.
< g:NOSIG=BLUE
* Commands are indicated by ">", and responses are indicated by "<".