Getting ready to sew, Choosing and changing accessories, Changing prosser feet – SINGER 3150 User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

r

2. Getting Ready

to Sew

Choosing and
Changing Accessories

CAUTION* Disconnect the power line plug

from the socket outlet when changing needles,
feet, or needle plates, or when leaving the

machine

unattended.

This

eliminates

the

possibility

of

starting

the

machine

by

accidentally pressing the speed controller.

Changing Prosser Feet

Raise needle to highest position by turning

the hand wheel toward you.

Raise presser foot.

1.

Press toe of presser foot upward as far

it will go until it snaps free.

as

2.

Centre the new presser foot under the

shank A. Lower the presser foot lifter so

that the shank fits over the presser foot

pin.

3.

Press presser foot screw down firmly until

foot snaps into place.

11

Advertising
This manual is related to the following products: