Face plate area, Bobbin and feed areas, Exterior areas – SINGER 3150 User Manual
Page 81
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Face Plate Area
To clean y and oil A the front interior of
machine, remove screw A from face plate. With
a soft cloth or lint brush, clean and oil points
indicated by arrows. Replace face plate and
screw.
Bobbin and Feed Areas
To clean bobbin and feed areas, remove needle
plate, as instructed on page 15. RenrK>ve bobbin
case as instructed on next page. Using soft
cloth
or
brush,
clean
area
as
illustrated.
Replace needle plate and bobbin case, as
instructed on pages 15 and 81.
Exterior Areas
If necessary, a mild solution of soap and water
may be used on exterior areas to remove
stubborn stains. No other cleaning liquid or
powder should be used.
79