Attaching blindstitch hem guide – SINGER 3150 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Removing and Replacing
the Button Foot and
Foot Shank
Raise needle to highest position by turning
the hand wheel toward you.
Raise the presser foot.
Loosen presser foot screw A and remove
the shank B guiding it to the right.
To replace the accessory, hook shank
around the presser bar and tighten the
presser foot screw.
NOTE:Insert the edge of a coin in the presser
foot screw to loosen it and tishten it securely.
Attaching Blindstitch Hem
Guide
•
Raise presser foot, loosen presser foot
screw
and
slip
blindstitch
hem
guide
between screw and shank of the general
purpose foot.
•
Be sure underside of the guide clears the
slide plate and front of foot.
•
Tighten screw with a coin.