Threading the bobbin case – SINGER 3150 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
^
( —
X
Threading the Bobbin Case
1.
Hold bobbin to that thread unwinds in
direction
shown,
and
insert
bobbin
in
bobbin case.
2.
Pull thread Into notch A in bobbin case,
draw it toward left and into slot B.
3.
Draw approximately 10 cm (4 inches) of
thread diagonally across the bobbin.
4. Close slide plate, allowing thread to extend
through the slot between the slide plate and
the needle plate.
25
Advertising